IPRE Fluke Setup

From IPRE Wiki
Revision as of 18:43, 5 December 2007 by Doug Blank (Talk | contribs)

Jump to: navigation, search

If you are using version 0.5 or later of the IPRE Fluke, then you need only Start Python and issue the commands:

>>> from myro import *
>>> upgrade("fluke")

If you have an older version (version 0.4 or earlier) of the IPRE Fluke, then you will need to directly connect to the Fluke with a serial cable, provide an external power supply, and download and run the program http://myro.brynmawr.edu/~dblank/lpc21isp-ipre-win.zip:

unzip lpc21isp-ipre-win.zip
lpc21isp-ipre.exe -control main.hex /dev/tty.usbserial 38400 20000
lpc21isp-ipre.exe -control main.hex com1 38400 20000

The source code for the above can be found: