Tekkotsu XWalk Introduction

From IPRE Wiki
Revision as of 02:43, 16 December 2010 by Ypan01 (Talk | contribs)

Jump to: navigation, search

What is XWalk

XWalk is a motion trajectory generator in Tekkotsu. Once the configuration of a robot is set in the .kin file, XWalk will enable the robot to walk over a certain displacement at a certain speed.

How to run XWalk

1)Running XWalk with a Robot simulation

    cd Tekkotsu/tools/mirage

Afterward, a window should appear, displaying the Mirage 3D environment.

  • C. connecting Tekkotsu
  cd Tekkotsu/project
  ./tekkotsu-TARGET –c mirage.plist (for example, if we use the simulation of Gort, we type :
  ./tekkotsu-GORT –c mirage.plist)
  • D.turning on ControllerGUI
  cd Tekkotsu/tools/bin
  ./ControllerGUI localhost
  • E.Root Control -> TekkotsuMon -> Walk Controller
  • Actually, not only the Walk Controller will call XWalk, many other motions in the list, including Chase Ball call XWalk, too.